Product Catalog

Description

Cutter 1/8"-2", Heavy-Duty 2-A

Description

36" Pipe Wrench lightweight aluminum 836

Description

Pipe Wrench 24" lightweight aluminum 824

Description

Pipe Wrench 18" lightweight aluminum 818

Description

Threader with dies, No. 12-R: Capacity 1/8"-2"

Description

Porta-Nails Twin Trigger 20 is designed to install 1/ 4” to 7/16 “engineered and solid flooring. This is an ideal tool to use when the top layer of the floor is less that 1/16” thick. The thin staple helps to reduce the risk of dimpling the floor. This 20 gauge flooring stapler offers a dual trigger for optimum comfort. Use its conventional trigger for positioning behind the tool. When positioning in front of the tool use the secondary trigger located at the rear of the tool. Both triggers provide the optimum positioning for your trigger finger and ensures the proper firing position for the ultimate in precision, comfort and firing accuracy. A tool free adjustable shoe is featured which accurately configures for 1/4 “ to 7/16 “ thick flooring and delivers a 1 In. x 20 Ga x 3/16” crown staple. This tool is built for long life with a steel cylinder, metal piston, driver blade and a built in safety that helps to prevent accidental firing until the to

Description

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti

Description

The MK-BX-4 uses a patent pending misting system to control dust generated during cutting. The ergonomically designed, easy to grip nylon handle with built-in lockable trigger switchhandle allows for easy operation and control for either left or right handed cutting. Unique features include a removable plastic tray and a locking table with an adjustable depth stop to prevent cutting through the table. Portable and lightweight, the BX-4 encorporates an Open-back design that allows for material up to 16" long and 5" deep to be cut and the plastic dust collection pan with replaceable dust filter make on site dust control a snap

Description

The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame accommodates 6" and 8" profile wheels. A simple blade shaft lock makes for easy blade removal and the linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal. Made in the USA with a One-year limited warranty

Description

The MK-370EXP features a Powerful high-torque motor with a maintenance-free, self-lubricating pinion and gear-box assembly. The tilting head allows for precise 45º miter cuts and a Variable height cutting feature allows for plunge cutting up to 2". The 370EXP has a sliding aluminum die-cast cutting table that rips 18" tile and 13" on the diagonal. The 3/4" diameter chrome-plated linear guide-bar system and single piece zinc-plated steel frame provide rigidity, strength and durability. A simple, hinged blade guard enables easy blade changes and the removable thermoplastic water reservoir makes for easy cleaning and maintenance of the saw. This item comes with a heavy duty on/off switch, built-in water pump receptacle, and 7" diamond blade & submersible water pump included. One-year limited warranty

Description

13.1 CFM @ 100 PSI, Wheelbarrow Compressor, 8 Gallon Storage Capacity, 196cc Honda GX200 OHV With Low Oil Shut Down, Stainless Discharge Hose

Description

2 HP 110V Twin Stack Compressor, 4.1 CFM @ 100 PSI, Stainless Discharge Hose

Description

11 Amp Sawzall Recip Saw w/Case

Description

1/2" Square Drive 7 Amp Impact Wrench

Description

1/2" Right Angle Drill, 0-335 RPM/0-750 RPM

Description

Heat Gun 11.6A Varied Temp Kit

Description

Tilt-Lok 7-1/4" Circular Saw with Case

Description

Norseman heavy duty convection heaters feature cast iron burners and heavy gauge steel bodies. Norseman heaters are ideal for rental or rugged usage on construction sites, or anytime electricity is not available

Description

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service. The patented fused brake disc design means little to no maintenance is required to

Description

WILTON Unbreakable 30" Handle Sledge Hammer, 10LB Head -- Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber. Ergonomic handle absorbs shock, ensures comfort and has a slip-resistant grip. High-visibility head adds instant identification under any job site conditions; encourages safe work habits. Not to be used to strike any object harder than 46HRC. Never replace a sledge handle again! Outlasts wood and fiberglass handle sledges by thousands of strikes

Description

WILTON Unbreakable 30" Handle Sledge Hammer, 14LB Head -- Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber. Ergonomic handle absorbs shock, ensures comfort and has a slip-resistant grip. High-visibility head adds instant identification under any job site conditions; encourages safe work habits. Not to be used to strike any object harder than 46HRC. Never replace a sledge handle again! Outlasts wood and fiberglass handle sledges by thousands of strikes

Description

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664

Description

High-quality welded steel construction with a durable powder coat finish. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. 

Description

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards