Product Catalog

Description

27 hp (20.1 kw) Kohler® engine
Patented, easy-to-use traction control system
34.5" width with bucket
Turf friendly at only 1882 pounds

Description

The sand blaster can be used to clean EVERY imaginable surface. From hardened steel, to soft wood, to sheet metal to soft aluminum, from log homes to swimming pool tile, from engraving the date of death on your tombstone, brick, cement, iron, wood, fiberglass, ceramic, stucco, CMU’s, glass, limestone, marble, granite, brass, copper and it will make that old restoration project be just like new whether it’s a tractor, car or a boat.

Description

The CD-3513HWBSGEN is a heavy duty pressure washer that is powered by a commercial-grade Honda GX390 gas engine. The BE Cooldrive technology is designed to keep the pump cool. Cool air is draw in over the pump reducing the heat by 25%.

Description

These portable gas-powered hot water units are built using heavy-duty components and rugged steel chassis to withstand the most rigorous conditions.  Their compact frame design and tubed pneumatic wheels provide easy maneuvering in all terrains.  Each unit is ETL certified and comes with a leak free Schedule 80 heating coil surrounded by a standard stainless steel wrap.

Description

The Little Giant Plank converts any of our multi-use ladders into a simple scaffolding platform. This high-strength plank, rated to hold 250 pounds, enables a person to stand erect and use both hands while on the ladder and can be stored in nearly half of its extended length. It's light enough for easy setup and handling and features a slip-resistant surface for safety.

Description

Eliminate Severe Odors with the Only Maintenance-Free Ozone Generator!

Dealing with tough odors on your restoration job? The Total Zone TZ-2 Ozone Generator produces 3,000 milligrams of ozone and is ideal for use in mid-size rooms and containment zones. It eliminates cigar/cigarette odors, pet odors, cooking odors, paint odors, and more!

Produces 3,000 milligrams of ozone per hour
Can handle jobs up to 120,000 cubic feet
100 CFM fan
Weighs less than 10 lbs; pulls just 2 amps
For use in unoccupied areas only

Description

5.5lbs, lightweight and well balanced for easy maneuverability
Side loading magazine convenient and easy for quick replenishment
Tool-less depth of drive adjustment for precision nailing/flush driving
Carbide tipped push lever reduces wear
Rubber pads help keep nailer from sliding off roof when not in use
Quick driving for maximum efficiency
Pneumatic power feed and return allows tool to operate in the harshest conditions
Long-lasting rubber grip for added comfort

Description

Equipped with a new, more secure selective actuation switch, which allows for easy transition from single to contact actuation
8.4 lbs, lightweight and well-balanced for easy maneuverability
Driving port suited for a wide range of available nails
Rear loading magazine for quick replenishments
Open nose design for easy extraction of a jammed nail
Rubber grip for add comfort
Hardened claw tip reduces wear and limits slippage when driving at a slanted angle

Description

15-Gauge Angled Finish Nails
4.4 lbs, lightweight and well balanced for easy maneuverability
Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
Tool-less clogged nail release mechanism for greater ease of use
Depth of drive adjustment, for accurate nail depth in varying materials
Unique air duster, clears debris before material installation
Adjustable air deflector, directs the air exhaust in any direction
Long-lasting rubber grip, for added comfort

Description

NT50AE2 accepts 5/8" to 2" 18-gauge fasteners
New selective actuation switch lets the user easily select bump fire or sequential fire modes
At only 2.2 lbs, it is well balanced and lightweight to make finish work a breeze

Description

This 40 foot fiberglass DeWalt extension ladder comes with a 300lb load capacity. Comes equipped non-conductive railing, non-marring durable top and slip-resistant rubber tread.

Non-Marring Durable Top with Tool Slots
Top Provides Stability on Corners or Irregular Surfaces
Top has Slip-Resistant Rubber Tread
Quick Latch to Lock Rungs in Place
Rung Caps to Eliminate Noise
Rope Pulley Included

Description

This 32 foot fiberglass DeWalt extension ladder comes with a 300lb load capacity. Comes equipped non-conductive railing, non-marring durable top and slip-resistant rubber tread.

Non-Marring Durable Top with Tool Slots
Top Provides Stability on Corners or Irregular Surfaces
Top has Slip-Resistant Rubber Tread
Quick Latch to Lock Rungs in Place
Rung Caps to Eliminate Noise
Rope Pulley Included

Description

This 24 foot fiberglass DeWalt extension ladder comes with a 375lb load capacity. Featuring non-marring hand grips, non-conductive railing, Quick latch and wrap around shoes.

Non-Marring Aluminum Hand Grips
Independently Riveted Rungs
Rope and Pulley Included
Aluminum Rung Locks with Latch
Wrap Around Aluminum Shoes

Description

A 14 foot non-conductive fiberglass industrial twin front ladder with the ability to hold a load capacity of 375lbs. Featuring Shox impact system, heavy duty gusset bracing, and Da Boot.

SHOX with Superior Impact Absorption
Da Boot Slip Resistant Boot
Heavy Guauge Steel Hinges
Inside Spreader Braces
Heavy Duty Gusset Bracing
Rived Step Construction

Description

A 12 foot non-conductive fiberglass twin front ladder with a load capacity of 375lbs. Equipped with Shox impact system, foot metal boot, reinforcement plates, and heavy guage steel hinges.

SHOX with Superior Impact Absorption
Full Metal Boot
Inside Spreader Braces
Heavy Guauge Steel Hinges
Double-Rivet Step Construction with Heavy Duty Gusset Bracing
Reinforcement Plates

Description

This 8 foot fiberglass DeWalt step ladder comes with a 300lb load capacity. Comes equipped non-conductive railing, working top with tool slots and magnet, and an impact absorption system.

Durable Top with Magnet and Tool Slots
Internal Spreader Braces
25% Greater Step Surface
Double Rivet Step Construction
Heavy Duty Boot with Slip-Resistant Surface Area

Description

Heatstar Forced Air 210,000 BTU Kerosene Heater - Big Heat when and where you need it with a new enclosed motor and quieter operation.

Whether you are using it in a garage or on the jobsite, this 210,000 BTU Forced Air Kerosene heater by Heatstar is up for the task. With jobsite ready dual powder coated tubular steel handles, pneumatic rubber tires and a split upper shell designed for maintenance, you can expect long life and faithful service from your Heatstar Forced Air Kerosene Heater.

Description

Heatstar Forced Air 175,000 BTU Kerosene Heater - Big Heat when and where you need it with a new enclosed motor and quieter operation.

Whether you are using it in a garage or on the jobsite, this 175,000 BTU Forced Air Kerosene heater by Heatstar is up for the task. With jobsite ready dual powder coated tubular steel handles, pneumatic rubber tires and a split upper shell designed for maintenance, you can expect long life and faithful service from your Heatstar Forced Air Kerosene Heater.

Description

When you're tired of replacing damaged pedestals, use Schaefer OSHA compliant portable circulation fans with heavy-duty pedestal mounts, designed to last many years. Schaefer portable circulation fans deliver quiet, powerful, efficient and long lasting air movement. Use these rugged portable fans in warehouses, work areas, loading docks, greenhouses, farms, and other locations where quality matters.

Description

MBW Concrete Mixers are ruggedly built and take the punishment of this demanding application. Heavy-duty frame, drum yoke and drum assemblies are long-wearing and matched to anticipated stresses and loads. High quality cast iron pinion and gear rings provide long life and heavy-duty shroud opens to provide easy access to interior engine compartment. MBW concrete mixers are powered by reliable Honda engines with exterior "Shut Down" button for instant stopping of the mixer. They are well balanced and feature spring mounted axle assemblies for easy, stable towing.

Description

Excellent tool for applications where uniform grooves are necessary (water drainage)

Description

Constructed of high-carbon steel
Comes with an All-Angle Bracket

Description

Concrete Hand Tool -36" Broom

Description

These utility grapple tines can easily penetrate pen-packed material for quick clean-out. The grapple's tine spacing and one piece top clamp firmly grip hay and manure.